Crossfire abs Sensor Replacement

If you own a 2004-2008 Chrysler Crossfire you will eventually have to replace the front ABS sensors. With a complex stability/traction control system that pulls information from various sources, it best to make sure your sensors are in tip top shape. Relatively easy to replace once you know how to, Follow along with our simple DIY instructions and get your Crossfire breaking properly again. 

 

Parts for this DIY:

  • Two new Front ABS Sensors

 

Tools You’ll Need:

  • A Screwdriver Set
  • A Ratchet Set
  • A Torx Head Set
  • An Adjustable Plier
  • Loctite

 

Chrysler Crossfire ABS Sensor How-To Guide:

Crossfire abs Sensor ReplacementCrossfire abs Sensor ReplacementCrossfire abs Sensor Replacement
Step One:
Make sure you're working in a nice flat area and jack up the front of the car.
Step Two:
The plug for the sensor will be located towards the upper rear of the wheel well.
Step Three:
Spray some lubricant on the plug so it'll be easier to take apart.
Crossfire abs Sensor ReplacementCrossfire abs Sensor ReplacementCrossfire abs Sensor Replacement
Step Four:
To remove the plug you need to pop up and remove the retaining spring.
Step Five:
Make certain not to lose or discard the spring.
Step Six:
With the spring removed you can remove the plug and split apart the abs sensor.
Crossfire abs Sensor ReplacementCrossfire abs Sensor ReplacementCrossfire abs Sensor Replacement
Step Seven:
With the top portion removed next loosen the two torx bolts holding the sensor in place.
Step Eight:
Remove the old sensor and compare it to the new sensor to make sure they match.
Step Nine:
Slot the new sensor in place and install the torx bolts with a tab of Loctite.
Crossfire abs Sensor ReplacementCrossfire abs Sensor Replacement
Step Ten:
Press the connector together with the one that remained to form a single plug.
Step Eleven:
Reinstall the plug and press in the retaining clip. Make sure everything is snug.

 

 

Potential Savings from Used Parts:

None! Don’t buy used brake parts ever! However, if your YAW sensor is giving you issues, or the ABS control module, then there are plenty of used options available listed below for your Crossfire. 

Genuine Chrysler Crossfire Yaw Sensor 5101117AA

$831.70
End Date: Saturday Nov-4-2017 11:47:30 PDT
Buy It Now for only: $831.70
Buy It Now | Add to watch list

Genuine Chrysler Crossfire Yaw Sensor 5136176AA

$641.72
End Date: Saturday Nov-4-2017 11:52:35 PDT
Buy It Now for only: $641.72
Buy It Now | Add to watch list

Chrysler Crossfire Mercedes SLK 320 Yaw Turn Rate Sensor A 003 542 23 18 Q01

$125.00
End Date: Saturday Oct-28-2017 18:30:20 PDT
Buy It Now for only: $125.00
Buy It Now | Add to watch list

CHRYSLER CROSSFIRE YAW SENSOR A0025428918Q05

$55.00
End Date: Tuesday Oct-17-2017 13:43:18 PDT
Buy It Now for only: $55.00
Buy It Now | Add to watch list

2005 Chrysler Crossfire YAW SENSOR 0025428918

$60.00
End Date: Monday Oct-23-2017 9:41:12 PDT
Buy It Now for only: $60.00
Buy It Now | Add to watch list

Leave a Reply

Your email address will not be published. Required fields are marked *

error: